Echeveria Lilacina ‘Ghost Echeveria’ – Simple Care Guide

Echeveria Lilacina

Echeveria Lilacina likewise is also called ‘Ghost Echeveria’ and is widely known for a stunning looking succulent. As the plant grows, you can expect it to et to around 15 centimeters (or 6 inches) high and about 17.5 centimeters (7 inches) in size.

The plants’ leaves are primarily light pink to grey-green. When it blooms, it will produce pale pink to coral pink flowers from the late winter season to early spring.

Echeveria lilacina is also a slow-growing and attractive succulent with spoon-shaped, fleshy, silvery-grey leaves organized in a balanced rosette that develops into 6 inches (15 cm) high and approximately 7 inches (17.5 cm) in size. Flowers are pale pink or coral pink and appear on short arching racemes on the top of approximately 6 inches (15 cm) reddish long stems. The blooming duration extends from the late winter season to early spring.

Origin of Echeveria lilacina

Echeveria Lilacina

The plant comes from Nuevo Leon in the northern part of Mexico, Central America. The plant is likewise a native Texan.

Scientific name of Echeveria lilacina

The botanical name of this plant, Echeveria lilacina, originates from the truth that its dirty leaves bring a lilac color.


The USDA plant hardiness zones 9b to 11b: from − 3.9°C (25°F) to +10°C (50°F).

Echeveria lilacina care and propagation

Echeveria Lilacina

Most typical types of Echeveria are not hard to grow succulents, provided some basic guidelines are followed. Firstly, make sure you do not allow too much watering so that water won’t sit in the rosette as this can cause root rot or fungal diseases which in turn can kill your plant.

In addition, always remove dead leaves from the plant’s bottom as it grows, this is because the dead leaves serve as a haven for pests. Succulents are very susceptible to mealybugs.

As for all succulents, moderate watering and lighting will ensure the success of your garden.

Repot as required, ideally throughout the warm season. To repot a succulent, allow the soil to dry up prior to repotting, you can then remove the pot.

Make sure the old soil is also removed from the root of the plant, and also removing any decomposed or dead roots while doing so and treat any plant’s wound with an appropriate fungicide.

The majority of Echeverias can be quickly propagated from leaf cuttings, although many of them are much better propagated from seeds or stem cuttings.

To propagate a leaf cutting, put the individual leaf in potting soil for succulents and make sure the dish is covered up until the brand-new plant grows.

Discover more at How to Grow and care for Echeveria.

How to water Echeveria lilacina

Echeveria Lilacina or Ghost Echeveria can be rather stunning when proper caring is done. This succulent type requires normal watering as the other succulents. The watering approach is extremely crucial to keep your Ghost Echeveria healthy.

Overwatering must be avoided and your plant shouldn’t sit on the water. Soak and dry method remain the best watering approach for this succulent. The succulent must be controlled to prevent overwatering.

Flowering And Scent

The echeveria lilacina produces coral, aromatic, or pale pink flowers at the end of arching, short reddish stems.

The plant might flower at any time starting from late winter season to early spring.

Light And Temperature Requirements

Just like the majority of succulent Echeveria plants and cacti, lilacina Echeverias like lots of sunshine and heat. The plant is winter durable in USDA hardy zone 10 to 11.

It does well outdoors in full sun or partial shade. A bright sunny window is an ideal place when grown indoors.

Generally, more direct sun exposure produces much better efficiency, brighter colors, and more powerful, tougher leaves and stems.

Fertilizer Requirements

Throughout the spring and summertime, fertilize Echeveria lilacina using a water-soluble liquid fertilizer with a low to medium nitrogen material.

Follow product packaging guidelines thoroughly and do not add fertilizer during the winter season.

Soil & Transplanting

Succulent potting soil is the best type of soil to use for Echeveria lilacina.
Make sure that any soil type you use is well-drained and permeable.

The plant produces offsets every time. Separate them from the parent plant and repot the entire plant when this occurs. Also, repotting must be done in the early spring.

Allow the soil to dry entirely before taking the plant and its offsets from the pot.

Knock away the dry soil from the roots and inspect the roots for rotten or dead areas. Cut away these locations, and treat the cuts with a fungicide.

Leave the plant for one or more days to callous. Repot into fresh, dry potting mix ideal for cactus or succulents.

Do not water for about a week if you repot immediately. Start watering immediately after this waiting period.

Grooming and maintenance

Naturally, the lower leaves die every time. Remove them without delay when this takes place.

How To Propagate Echeveria Lilacina Ghost

Echeveria Lilacina

Echeveria does not produce many offsets. Some specific plants might stay singular throughout their lives. Plants can likewise be grown from leaf cuttings.

Make sure they are separated from the parent plant and put them in individual pot or garden trees per the repotting guidelines above if the plant produces pups.

Growth and development

This slow-growing echeveria hardly ever gets to a height higher than 6 inches. In perfect settings, the plant might grow up to 8 to 10 inches high and spread out as much as one foot.

The spoon-shaped, fleshy leaves of the Echeveria lilacina plant are an appealing shade of silvery grey that handles a more lilac shade throughout the cooler months of fall.

More sun will likewise deepen the lavender/purplish color. The leaves grow in a symmetrical rosette shape reaching widths as much as 10 to 12 inches throughout.

Where to Plant Echeveria Lilacina

Echeveria Lilacina ‘Ghost Echeveria’ succulents require strong light. When planting this succulent in your garden, ensure it gets full to partial sun as this is best for its development. It is much better to grow outside instead of indoor.

This kind of succulent chooses a warm environment and can survive at zone 9b to 11b which is around 25°F  (-3.9°C). It is much better to plant Ghost Echeveria in an indoor environment if you live in a cold location. As long as it gets enough sunshine, the plant will grow gladly.

How to Propagate Echeveria Lilacina ‘Ghost Echeveria’

Ghost Echeveria can be propagated by leaves, cuttings, or seeds. This succulent type does not need repotting frequently. Obviously, the newbie repotting is important when it is purchased from the shop. You can find out everything about How To Repot Succulents in our guide.

Ghost Echeveria can be propagated by seeds, leaves, or cuttings. This succulent type does not need repotting frequently. Obviously, the newbie repotting is necessary when it is purchased from the shop. You can find out everything about How To Repot Succulents in our guide.

Like all the other succulent types, a well-drained soil mix is vital.

When choosing what pot to utilize, be sure you know what types of different products to use

How to Propagate Echeveria Lilacina ‘Ghost Echeveria’ By Leaves

When propagating Ghost Echeveria with leaves, you should carefully get leave from the parent plant. It needs to be a healthy leave that has no part left on the stem. In this way, the propagation will work.

Allow the leaves to callous by waiting for a few days. Use well-draining soil for your brand-new succulent plant. When the soil dries out, do not forget to water.

How to Propagate Echeveria Lilacina From Cuttings

When propagating Ghost Echeveria from cuttings, carefully cut a leaf from the parent plant with a clean knife or scissors. Prior to replanting, allow the leaf to callous by waiting for a few days. Well-drained soil should also be used. And do not forget to water when the soil looks dry.

How to Propagate Echeveria Lilacina from Seeds

This succulent type is a sluggish grower so even if it can be propagated by its seeds, this technique is not recommended. To propagate from the seeds, plant the seeds in a well-draining soil mix. This approach can be used outdoors. In cooler locations, indoor propagating is advised.


1.    Echeveria ‘Lilac Dream’
2.   Echeveria ‘Lola’
3.   Echeveria ‘Moondust’
4.   Echeveria ‘Orion’

Lilacina Echeveria Pests and Diseases

Like all plants in the genus Echeveria, they are simple to care for and propagate as long as you:.

1.   Plant in well-draining cactus soil.

2.  Have a light touch with the water.

3.  Offer lots of warmth, sunshine.

4.   Overwatering will cause fungi disease and rot, which will certainly kill your plant.

5.   Supply excellent ventilation and appropriate spacing to permit excellent air circulation around the plants.

This single action will go far to reduce the dangers of bacterial and fungal infections and bug problems.

Be extremely cautious of high humidity during cool weather conditions.

Cacti and succulents are normally pest-free as long as you preserve a healthy environment.

Overwatering, insufficient sun, or direct exposure to polluted plants can result in invasion by the normal suspects:.

1.  Fungi Gnats.

2.  Spider termites.

3.   Mealybugs.

4.  Root mealybugs.

5.   Scale pests.

Is This Plant toxic or harmful?

According to the Society for the Avoidance of Ruthlessness to Animals (ASPCA) really comparable ranges, Blue Echeveria plants are non-toxic, and this is rather most likely to also apply to Ghost Echeveria.

Nevertheless, keep your kids, plants, and animals safe by restricting access.

Is This Plant Invasive?

This slow-growing succulent plant is ruled out intrusive.